In Stock


Nail Art Machine price in Pakistan

Nail Art Machine price in Pakistan PREPARATION FOR USAGE Place the device on the edge of a smooth surface
table (e.g. glass top table) and make sure that the finger holder (part #1) is
placed at the very edge of the table for comfort usage. Turn the suction handle
(part #2) clockwise while pressing the device down firmly onto the table. This is
to prevent the device from sliding during use. Wet the suction cup (part #3), if
necessary. To ensure ease of usage, cultivate the habit of leaving the device head
(part #4) in the center of the device between the finger holder (part #1) and the
plate holder (part #5). Never slide the device head without the pattern plate
(part #6) placed in the plate holder (part #5). This is because the paint screen
unit (part #7) on the device head (part #4) will scrape onto the plastic surface of
the plate holder (part #5) thus damaging the paint screen unit (part #7) which

will later transfer colours. Remove unclear and smeared nail pattern designs.
Lock the paint screen unit into the device head by pushing its both end corners
of the unit firmly down with the sound of 2 clicks. Make sure that all the pattern
plates and rubber stamper are thoroughly cleaned with Nail Polish Remover
prior to usage. As this product is straight from the factory the plates and rubber
stamper may need to be prepared for first use. DO NOT forget to remove the
transparent film on all the pattern plates prior to usage. 2. CHOOSING YOUR
PLATES AND COLOURS Remove the plastic transparent covering on top of
each pattern plate. For designs involving only one color or step – “0” will be
indicated in the inner circle on each pattern plate. For designs involving several
colors or steps – “1”, “2”, “3” … will be indicated in the inner circle on each
pattern plate. For multiple colors or steps designs, rotate your pattern plate
accordingly to the numbers indicated in the clockwise direction. Once you have
chosen your desired nail pattern design, place that pattern plate on top of the
plate holder. Select a pattern plate for each step of your desired nail pattern
design. Do not bend or scratch your pattern plates. 3. ADJUSTING THE
FINGER HOLDER Place your finger resting on the finger holder with the tip
of your fingernail resting on top. The C-line indicator (part #8) shows where
the center of the pattern will appear. As fingernails differ in length, adjust the
finger holder accordingly to ensure that the center aligns with your nail center.
Make sure that particular nail coincides with the C-line indicator. Release the
finger holder by unlocking its knob (part #9) clockwise. After deciding where
you want the pattern to appear on your nail, with your fingernail resting on the
top of the nail rest, push the finger holder accordingly with the guidance of the
C-line indicator. Lock the finger holder by turning the finger holder’s knob
anticlockwise. 4. MAKING PATTERNS ON YOUR NAILS Apply your selected
color to cover the entire pattern. Read the following important tips: a. To
ensure the best results, try to apply an even and a thin layer of paint. Do not apply too
much paint as this will prevent smearing excess paint onto the pattern plate. b.
Do not waste time closing your paint bottle after you apply your color as this
paint dries up very fast (within 5 seconds). Once the paint dries up, the painting
pad may not pick up or transfer the complete pattern. Place your finger resting
on the finger holder (adjusted and locked). Slide the device head first toward
the far end of the plate holder and press down the printing pad holder (part
#10) gently down to pick up the pattern. Next slide the device head to the other
far end of the finger holder and press the printing pad holder gently down to
transfer the pattern onto your nail. You must slide the device head quickly from
one end to the other end of the nail paint will dry up. For a pattern with several
steps and colors, pick up and rotate the plate counterclockwise to the next
step and repeat the above process again. For such designs, be sure to keep your
finger still so that the design will align accurately. After all steps and colors are
carried out, apply the top coat thinly to seal the pattern to prevent it from chipping
and fading. 5. CLEANING PROCEDURES Paint screen unit can be released by
pressing the two buttons (part #11) found next to the 2 corners of the unit. The
paint screen unit will “pop” out upon release. Thus, cover the unit with one
palm to prevent it from flying out. Use a cotton bud soak with polish remover
to clean the “blade” of the paint screen unit. Use a cotton soak with nail polish
remover to remove paints and dirt from the printing pad. For cleaning the
pattern plates, use a cotton pad soaked in Nail Polish remover to clean. To
make all cleaning processes easier and less time-consuming, use lint-free
products to clean instead High-Quality Nail Art Machine Lowest Price in
Pakistan 1999/- Only  Women’s Floral Printed Maxi Dress


There are no reviews yet.

Be the first to review “Nail Art Machine price in Pakistan”
Nail Art Machine price in Pakistan
 1199 Add to cart